This page provides instructions for setting up your Wallbox charger with ChargeLab software. After you complete steps 1-5, it is critical that you submit THIS form to register in ChargeLab's system.
1. Confirm Power
- Check that the charger’s LED ring is illuminated:
- Solid Green = Ready
- Pulsing Blue = Connecting via Bluetooth
- Solid Blue = Connected via Bluetooth
- If LEDs are off, ensure the breaker is on and the unit is powered.
2. Install Wallbox App & Create Account
- Download the Wallbox app from the [Google Play Store] or [Apple App Store].
- Open the app and sign up using your email.
- After account creation, you'll land on the home screen.
3. Add Your Charger
- From the home screen, tap the “+” (Add) icon.
- Use your phone to scan the QR code on the left side of the charger.
- This automatically fills in the serial number and unique.
- Select your region or state, then tap “Add”.
4. Connect to Wi-Fi
- Tap the charger on the home screen to open its detail page.
- Tap the gear icon (⚙️) in the top-right corner to access settings.
- Go to Network → Wi-Fi.
- Tap “Use Bluetooth” to initiate a Bluetooth pairing.
- Once paired, select your local Wi-Fi network. The charger will connect.
5. Configure OCPP Settings
- Tap the charger again to enter settings.
- Scroll to and select “OCPP.”
- In the URL field, select “ChargeLab”.
- If this option does not appear, choose “Custom” and use wss://ocpp.io as the OCPP URL.
- In the Charge Point Identity field, enter the serial number of the charger.
- Save and confirm.
6. Claim the Charger
- Complete this form
- After you submit the form, you will receive the following within 24 hours:
- An email confirmation that your dashboard has been set up
- An invitation to your dashboard for configuration
- Access your dashboard to manage pricing, access and reports