Configuration Guide for Model Number: GMEV40CMC1B-WC

Model: GMEV40CMC1B-WC

• Power: 9.6 kW AC Level 2 charger, 240 Vac, 40 A
• Connectivity: 4G (cellular), Ethernet

• 

Cellular Setup (Non-Eaton SIM):

1. Replace the SIM Card:
   • Carefully open the EV charge station to access the internal components.
   • Replace the Eaton-provided SIM card with your own SIM card, ensuring it is compatible with Verizon, AT&T, or T-Mobile networks.
2. APN Configuration:
   • Download and install the Eaton EV Charger Commissioning Tool here on a Windows 8/10/11 PC. The Software can be found  in Resources under Software, firmware, and applications. 
   • In the Commissioning Tool, go to Settings -> Cellular.
   • Enter the APN (Access Point Name) provided by your SIM card provider.
     
   • Click Submit to save the APN settings.
3. Reboot and Verify:
   • Reboot the charge station via Other Functions -> Reboot EV Charge Station.
   • Disconnect the Ethernet cable if it is connected.
   • On the LCD screen:
     • A 4G will appear, indicating the station is connected to the 4G network.
     • The Eaton CNM chain icon will illuminate once the station successfully connects to the Eaton CNM.

Ethernet Setup:

1. Connect Ethernet Cable:
   • Plug in the Ethernet cable directly from a router or network switch into the charge station’s Ethernet port.
2. Verify Ethernet Connection:
   • On the LCD screen:
     • A computer screen with a checkmark icon will appear when the station is connected via Ethernet.
     • The Eaton CNM chain icon will be illuminated to show connection to the Eaton CNM.