Grizzl-E Wi-Fi Requirements

Tips for Connecting Your Grizzl-E Charger

To successfully connect your Grizzl-E charger, follow these tips:

1. Check Your Wi-Fi Network’s Frequency

   • Ensure your network is operating on a 2.4 GHz frequency, as the Grizzl-E does not support 5 GHz Wi-Fi.                                                                                                                                                 

2. Verify Wi-Fi Signal Strength

   • The signal strength should ideally be -67 dBm or better at the charger’s location.                              

3. Confirm the Wi-Fi Password

   • Make sure you’ve entered the correct password that matches your network.                                         

4. Remove Network Blockages

   • Ensure no firewall or network filter is blocking the charger’s connection.
   • If needed, check your router settings and unblock the charger, which may appear as esp32-arduino.